91-020-65601253 / 65601254 / 65004375
ISO 9001-2015

Tensioners

 

Signode hand tensioners allow operators to bring strap to desired tension with minimal interruption, effort and strap waste.

 

Most tensioners have a base which goes under the strapping and rests on the flat surface of the object being strapped. For smaller or irregular bundles, a push-type tensioner, which has no base under the strap, is recommended.

 

PF - Push Type Feed Wheel Tensioner

PF - Push Type Feed Wheel Tensioner is designed for 3/8" to ¾" Apex and Magnus Steel Strapping - ideal for round or irregular bundles.

 

 

 

 

PFH - Push-type Feed Wheel Tensioner

 

The PFH Tensioner is a push-type feed wheel tensioner for tensioning steel strapping on round, irregular shaped, and many uncompressible objects with narrow surfaces. This tool has unlimited strap take-up and a breaker nose designed for easy break off of strap flush with the seal. The tool features a lift arm which prevents accidental release of applied tension.

 

 

 

 

PH2 - Rack and Pinion Tensioners

 

PH2 - Rack and Pinion Tensioner designed for ¾" to 1 ¼" size Apex and Magnus steel strap and uses serrated gripping dog to hold the pulled strap end. It can be used with either dry or lubricated strapping on round or irregular shaped packages.

 

 

 

 

ST - Feed Wheel Tensioner

 

ST Feed Wheel Tensioner is designed for 3/8" to3/4" Apex and Magnus Strap.

 

 

 

 

T - Feedwheel Tensioner

 

T - Feedwheel Tensioner is designed for 5/8 to 3/4" Apex and Magnus strap.

 

 

 

 

 

 

Windlass Tensioners

 

 

 

 

 

 

 

Combination Tools

 

AM 34/58 Manual Seal Feed Combination Tools

 

AM 34/58 Manual Seal Feed combination tools designed for 5/8 to 3/4 Apex and Magnus strap applications. Seal feed combination tools carry a stack of seals in a magazine for easy, fast loading.

 

 

 

 

SCM Manual Sealless Tools

 

SCM 12/58/34 Manual Sealless Tools designed for 1/2, 5/8" and 3/4 Apex and Magnus strap. Sealless combination tools require no metal seals saving time and money. Production interruptions for reloading are eliminated along with purchasing, inventorying and loading of seals.

 

 

 

 

SCL Combination Tool

 

The SCL is a high performance seal less combination tool designed for use with Apex and Magnus strap in both 13mm and 19mm straps.

 

 

 

 

PNSC-2-12/34/58

 

PNSC-2 Pneumatic Combination Tool is designed for use on steel strapping sizes ranging from ½" to .017" Apex and ¾" x .025" Magnus. PNSC-2 tool is ideal for strapping slit coils, bundled tubes and irregular shaped loads

 

 

 

 

PRHR-34-114

 

PRHR combination tool is designed for 1 ¼" Magnus steel strapping in gauges up to .035". This versatile tool is ideal for unitizing flat rolled steel and aluminium coils, wire coils, cut to length steel angular and irregular shaped products. PRHR is more durable and easy to handle

 

 

 

 

Sealers

 

RCD-1435/3435 Double Reverse Notch Type Sealer

 

RCD-1435/3435 is a double reverse notch type sealer use with3/4 to 1 ¼ Magnus strap. Notch type sealers cut into the seals and outer edges of the strapping turning tabs down (down notch) or up (reverse notch)

 

 

 

 

C Type Manual Sealers

 

C Type (1223/5823/3423) Manual sealers are regular duty sealers for front and side action with 1/2, 5/8, 3/4 Apex and Magnus strap

 

 

 

 

SRC Single Reverse Notch Manual Sealers

 

SRC 1223/5823/3423 Single Reverse Notch Sealers designed for 1/2, 5/8 and 3/4 Magnus and Apex steel strap

 

 

 

 

Pneumatic

 

Sealers

 

Signode pneumatic tensioners take most of the effort out of strapping large or compressible packages. They also make tensioning uniform and precise through adjustment of the air pressure regulator.

 

All pneumatic tensioners, except the WP-2, have unlimited strap take-up. All pneumatic tensioners are furnished with a quick-disconnect plug.

 

It is essential that an air filter- regulator-lubricator assembly (Part No. 424773) be installed ahead of the tool on the air line.

 

RCNS-2-114/34

 

RCNS-2-114/34 Sealer for use on 3/4" or 1-1/4" x .025" to .031" Magnus steel strapping.

 

 

 

 

 

N-1444-50 LSH

 

Pneumatic Sealer Double Crimp pneumatic hand tools for varying strap sizes and seal joint types are available for tension, seal and cut strapping.

 

 

 

2017 Copyright © Wani Technologies Pvt. Ltd. All Right Reserved.
Web design and development, Pune